Bofan - PT-201

PT201 is a GPS/GSM/GPRS tracking device which is specially developed and designed for motorcycle real-time tracking and security.With superior GPS and GPRS modules,PT201 has good sensitivity and stable performance.Especially,PT201 is well designed to work with LiveGTS, our web-based tracking system, which is suitable for a company to establish their own tracking platform to provide real-time tracking service to their customers or manage their fleet.
Product Feature
*Tracking via SMS or live tracking by GPRS 

*Current location report

*Tracking by time interval

*Position logging capacity up to 7000+ waypoints

*SOS panic (optional, available to preset 3 SOS number)

*Waterproof IP66

*Geo-fence control

*Low power alert

*Speed alarm

*Engine cut (optional)

*Get street address by SMS request 

*Get Google link for current location by SMS request 

*Get Google link for current location by SMS request 

*Save 50% GPRS cost above in different methods when working on FMS (BOFAN Smart Report Tech,ACC, Mileage report and Motion sensor) 

*Available to set different alarm notification methods when alarm (sending alarm SMS, or platform) 

*Vehicle maintenance reminder by mileage report 

*Mileage and GPRS report by distance 

*I/O:2 digital inputs,1 negative and 1 positive triggering;1 output

*Analog Input: 1 10 bits resolution analog inputs


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up PT-201


To set a Bofan device on rseRaG are configured through text messages, it is necessary to confirm these commands with user manual, then you need to configure as follows.

With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial of the device and data APN from your operator.

The most common commands for these enabled devices are placed (You should consult your manual).

Type the IMEI number
  1. Delete settings
  2. Set 14-digit identifier to be used with rseRaG normally the last 14 digits of IMEI, replace XXXX by the identifier.
    jm0aDBuWHFKCjSa4nw39DHNE55lgM x G7xsQttndu52yRnWOG
  3. Set the APN of your operator, the values Replace your operator
  4. Establish the server where we will connect.
  5. How often we want to establish the position is sent every 1 minute