istartek - VT600

Visit the manufacturer website

Features:
Quad Band 850/900/1800/1900Mhz
Track by SMS/GPRS
Track on Demand
Track by Time Interval
Track on Mobile Phone
Internal 4MB Memory for Logging
Inbuilt Tremble Sensor
Internal Backup Battery
SOS Alarm
Geo-fence Alarm
GPS Blind Area Alarm
Low Battery Alarm
Speeding Alarm
External Power Cut Alarm
Engine Cut (Engine immobilization)
Fuel Monitoring
Linsten-in (Optional)
3 Digital Inputs + 1 Outputs
1 Analog Input Detection

Specification:

Items	Specifications
Product	Vehicle GPS Tracker VT600 Car Alarm GPS Quad-band cut off fuel monitor car fleet management GPS
Power Supply	10.6V - 36V / 1.5A
Backup Battery	500mAh
Normal power consumption	55mA/h
Dimension	65mm x 61mm x 26mm
Weight	90g
Work time	30 hours in power-saving mode and 7.5 hours in normal mode
Operating temperature	-20° to 65° C
Humidity	5% to 95% Non-condensing
Frequency	Quad Band GSM 850/900/1800/1900Mhz
GPS Module	latest GPS SIRF-Star IV chipset
GPS Sensitivity	-159Db
GPS Frequency	L1, 1575.42 MHz
C/A Code	1.023 MHz chip rate
Channels	20 channel all-in-view tracking
Position Accuracy	10 meters, 2D RMS
Velocity Accuracy	0.1 m/s
Time Accuracy	1 us synchronized to GPS time
Default datum	WGS-84
Reacquisition	0.1 sec., average
Hot start	1 sec., average
Warm start	38 sec., average
Cold start	42 sec., average
Altitude Limit	18,000 meters (60,000 feet) max
Velocity Limit	515 meters/second (1000 knots) max
LED	2 LED lights to show GPS/GSM status
Flash Memory	4MB
Button	One SOS Button
Interface	3 digital inputs (1 negative, 1 positive triggering and 1 input changeable) 1 analog input 1 output.

Standard Accessories:

VT600 Tracker

GSM Antenna

GPS Antena

Power Cable

Optional Accessories:

USB Data Cable

Fuel Sensor

Microphone

Pin Switch

Relay

iButton

Buzzer

Temp. Sensor

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up VT600

Country

Carrier

APN

User

Password

To set the tracker send the following commands by SMS messages

Reset factory settings
FACTORY#
Set the time zone UTC-0
GMT,E,0#
Set the operator APN
APN,{{apn}},{{apnu}},{{apnp}}#
Set the GPRS server
SERVER,1,d.plaspy.com,8888#
or
0ZoEVERCM6iCFcvzgmOchjrVsrv4
Set the update interval every 60 seconds
TIMER,60#

To check parameter settings PARAM#

Trackers