Start Your FreeMonth |
From $0.99 USD*Month/Device |
Pay as you go. No contract |
|||
Features:
VT900 T
UMTS/HSDPA: 850/2100MHz
GSM/GPRS: 850/900/1800/1900MHz
VT900 A
UMTS/HSDPA: 850/1900MHz
GSM/GPRS: 850/900/1800/1900MHz
VT900 E
UMTS/HSDPA: 900/2100MHz
GSM/GPRS: 900/1800MHz
Track by SMS/GPRS
Track on Demand
Track by Time Interval
Track on Mobile Phone
Internal 8MB Memory for Logging
Inbuilt Tremble Sensor
Internal Backup Battery
SOS Alarm
Geo-fence Alarm
GPS Blind Area Alarm
Low Battery Alarm
Speeding Alarm
External Power Cut Alarm
Engine Cut (Engine immobilization)
Fuel Monitoring
1RS232++2OUTPUT+3INPUT
1 Analog Input Detection
Specification:
| Items | Specifications |
| Power Supply | 10.6V - 36V / 1.5A |
| Backup Battery | 500mAh |
| Normal power consumption | 55mA/h |
| Dimension | 65mm x 61mm x 26mm |
| Weight | 90g |
| Work time | 30 hours in power-saving mode and 7.5 hours in normal mode |
| Operating temperature | -20 to 65 Degree |
| Humidity | 5% to 95% Non-condensing |
| Frequency | VT900 T UMTS/HSDPA: 850/2100MHz GSM/GPRS: 850/900/1800/1900MHz VT900 A UMTS/HSDPA: 850/1900MHz GSM/GPRS: 850/900/1800/1900MHz VT900 E UMTS/HSDPA: 900/2100MHz GSM/GPRS: 900/1800MHz |
| GPS Module | Quectel L70 |
| GPS Sensitivity | -159Db |
| GPS Frequency | L1, 1575.42 MHz |
| C/A Code | 1.023 MHz chip rate |
| Channels | 20 channel all-in-view tracking |
| Position Accuracy | 10 meters, 2D RMS |
| Velocity Accuracy | 0.1 m/s |
| Time Accuracy | 1 us synchronized to GPS time |
| Default datum | WGS-84 |
| Reacquisition | 0.1 sec., average |
| Hot start | 1 sec., average |
| Warm start | 38 sec., average |
| Cold start | 42 sec., average |
| Altitude Limit | 18,000 meters (60,000 feet) max |
| Velocity Limit | 515 meters/second (1000 knots) max |
| LED | 2 LED lights to show GPS/GSM status |
| Flash Memory | 8MB |
| Interface | 1RS232 port for connect with magnetic card reader 3 digital inputs 2 output 1 analog input |
Standard Accessories:
| VT900 3G Tracker | GSM Antenna | GPS Antena | Power Cable |
Optional Accessories:
| USB Data Cable | Fuel Sensor | Magnetic card reader | Pin Switch | Relay | iButton | RFID Card | Temp. Sensor |
Set Up VT900
To set dssLWS you need to configure as follows. With the following commands through several text messages:
- Reset factory settings
qDYcrH9g - Set the time zone UTC-0
nzpjdxpA - Set up our operator APN
xC6BhHUXmV2n0s0VtUkD6iD3WiVV6R - Establish the server where we will connect
o9v9bUFc5YP9gifIAGvQTcncguJ
or
PZrbd0yKybC0xxj452zMH96qHP8C - Define that transmits every 60 seconds
PdBUN1vgy
To check parameter settings crKz84