Loading...

EV - EV-603

The EV-603 Vehicle/Motorcycle GPS Tracker by EV is a reliable and versatile tracking device designed to keep your vehicle or motorcycle safe and secure. With its waterproof and dust-resistant design (IP66 rating), this tracker can withstand various weather conditions, ensuring its durability and longevity.

Equipped with an internal GPS and GSM antenna, the EV-603 offers high sensitivity and accurate positioning. It also features an inbuilt 3D G-sensor for power management and motion detection, providing you with real-time alerts in case of any shocks or movements. Additionally, the tracker offers a free real-time web-based online tracking service, allowing you to monitor your vehicle's location and movements from anywhere.

Some outstanding features of the EV-603 include geo-fence management, over-speed alarm, listen-in function, car power lost alarm, low power alarm, and remote engine/oil cut-off capabilities. It also supports various input detections such as ACC ON/OFF, SOS panic button, and door open/close, with corresponding outputs for remote lock/unlock door or siren sounding. The tracker is equipped with a built-in relay and 8MB flash memory for data logging, ensuring that you have access to up to 60,000 locations.

The EV-603 is designed for easy installation and comes with built-in 3cs super magnets, allowing you to mount the device securely to any metal surface. It also features a backup battery with a capacity of 1100mAh, ensuring continuous operation even in case of power loss. With U-Blox GPS chip technology, you can rely on the EV-603 for accurate and reliable tracking of your vehicle or motorcycle.

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up EV-603

Country
Carrier
APN
User
Password

To set the tracker send the following commands by SMS messages, the sample setup the device password is rUGoQy, this password is the default

  1. Set the time zone UTC-0
    rUGoQyL+00
  2. Set the operator APN
    rUGoQyS1,{{apn}},{{apnu}},{{apnp}}
  3. You need to contact the manufacturer to enable the option to change server
    rUGoQyI1,54.85.159.138,8888