GSM module MTK program, GSM 4 Band Support TCP protocol
GPS Chipset U-BLOX 7020
GPS sensitivity -162dB
Hot start 1sec, average
Warm start 30 sec, average
Operating temperature -20°C-65°C
Humidity 5%To 95% Non-condensing
Voltage 12V
Average Current When stand-by <84mA
GPS Chipset U-BLOX 7020
GPS sensitivity -162dB
Hot start 1sec, average
Warm start 30 sec, average
Operating temperature -20°C-65°C
Humidity 5%To 95% Non-condensing
Voltage 12V
Average Current When stand-by <84mA
This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.
Set Up OBD
Country
Carrier
APN
User
Password
To set the tracker send the following commands by SMS messages, the sample setup the device password is XNqn, this password is the default
-
Factory reset
*RESET#XNqn## -
Set the time zone UTC-0
896XNqnE00 -
Set the operator APN
#803#XNqn#{{apn}}#{{apnu}}#{{apnp}}##
-
Set the GPRS server
#804#XNqn#54.85.159.138#8888## -
Disable sleep mode
SLEEP,XNqn00,0 -
Enable GPRS mode
71XNqn0 -
Set update interval 60 seconds
#809#XNqn#060#1##
To check settings *RCONF#
To check settings *RCONF1#