Loading...

Megastek - GMT-368SG

GPS Vehicle Tracker

Features:

  • Waterproof (IP66)
  • Tracking by SMS/GPRS (TCP/UDP) 
  • Tracking regularly
  • Support setting 3 authorized cell phone numbers
  • Power saving mode
  • Authorized number
  • Real time tracking
  • Geo-fence
  • Over speed alarm
  • Vibration alarm
  • Low battery alarm
  • No GPS signal alarm
  • Data Logger 
  • 2 digital outputs, 3 digital inputs and 2 analog inputs
  • External power connected/disconnected alarm
This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up GMT-368SG

Country
Operator
APN
User
Password

To set UJCcGO you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR

Type the IMEI number
  1. Set the identifier 15 X tracker replace the IMEI tracker
    SlCqvruL9coXwOJj2wkd55H0j6lH38k o TDIO1QuO1kVxGZ6qbSDroTrWeLGzGmRA1A
  2. Set up our operator APN
    FqQXlWpgsw4E3Gqb037g5lvUPuwt5k26ePwm
  3. Define how often will transmit to our example 120 seconds
    V6GVOkgkbqRqWw
  4. Establish the server where we will connect
    EsG4slBWmVkTt K94ql529AWvupJ5HOS
  5. Enable GPRS mode
    Kb6zL6qF8ADW