Loading...

Megastek - XT-007

Vehicle Tracker XT-007

Features:

◆Water resistance (close to IP67)

◆Compatible with built-in or external antennas

◆Remove alarm

◆Tracking via SMS/GPRS (TCP/UDP) 

◆Real time tracking

◆Tracking regularly

◆Power saving mode

◆Two way communication(optional)

◆SOS emergency calling

◆Geo-fence alarm

◆Over speed alarm

◆Vibration alarm

◆Low battery alarm

◆No GPS signal alarm

◆Data logger (built-in 8M flash memory)

◆Monitoring remote or two-way communication (optional)

◆Has 2 digital outputs, 3 digital inputs and 2 analog inputs

◆ACC detection

◆Oil detection

◆Remote fuel/engine cut off

◆Cut external power off alarm

◆Hitting alarm

◆AGPS

◆GSM anti-interference

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up XT-007

Country
Operator
APN
User
Password

To set rklgTW you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR

Type the IMEI number
  1. Set the identifier 15 X tracker replace the IMEI tracker
    wILkaYXTcZN84wwoUQHIzZ5sKvlYHiS F lNOMPlTRRNx4HH2KAH7XneRXMcapx9L3HI
  2. Set up our operator APN
    xXpQDQiiM4060OTAUbMtqohQUUGw6xwSovmG
  3. Define how often will transmit to our example 120 seconds
    3x9uLmatPaxnpv
  4. Establish the server where we will connect
    XrikYs701llAk D3bY9k4bH609wLneRC
  5. Enable GPRS mode
    M2WwVkLTMqQu