SinoTrack - ST-901M

Operating temperature -20°C ~ 70°C
Storage temperature -20°C ~ 70°C
Operating humidity 20% ~ 80%
Storage humidity 20% ~ 90%
Input voltage DC9 ~ 80V
Working current Around 60mA(12vDC), around 35mA(24vDC)
GSM Module Four-Band GSM850/900/1800/1900(MHz)
GPRS connectivity GPRS multi-slot class 10, GPRS mobile station class B
GPS Module Ubox 7020
Position accuracy 10 meters, 2D RMS
Tracking sensitivity - 159dBm
Acquisition sensitivity - 144dBm
acquisition Hot start 1s, warm start 30s,cold start 32s
Indicator LED 3colors indicator: Power, GPS, GSM


Hardware Features
Positioning Location tracking via SMS/GPRS (TCP/UDP):
  1. SMS location racking.
  2. signal real time location tracking.
  3. GPRS location tracking via time interval.
Wiretapping set authorized phone number and with external MIC:
  1. Use authorized phone number to call the tracker, after 5rings, the caller can listen to vehicle inside voice.
  2. Unauthorized number calling, tracker will not be monitored.
  1. main power cut off alarm.
  2. shock alarm.
  3. Over speed alarm.
Remotely control fuel/power
  1. remotely disable and enable fuel and power.
Product feature
  1. Small, easy to install.
  2. Built-in switching power, wide voltage input range.
  3. Can be powered by cigarette lighter or vehicle battery power.


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up ST-901M


The Sinotrack trackers work in eCks8D with the ID found in the 0S3TV command, to configure the tracker send the following commands via text messages

  1. Restore factory settings
  2. Set the time zone to UTC-0
  3. Set the APN of the operator
    8030000 {{apn}} {{apnu}} {{apnp}}
  4. Set up the GPRS server
    8040000 8888
  5. Set update interval on
    8050000 60
  6. Set update interval off
    8090000 60
  7. Switch to GPRS mode

To check the settings 0S3TV