Loading...

SinoTrack - GT06N

Specification
Operating temperature -20°C ~ 70°C
Storage temperature -20°C ~ 70°C
Operating humidity 20% ~ 80%
Storage humidity 20% ~ 90%
Input voltage DC9~36V
Working current Around 60mA(12vDC);around 35mA(24vDC)
GSM Module SimCom, Four-Band GSM850/900/1800/1900(MHz)
GPRS connectivity GPRS multi-slot class 10, GPRS mobile station class B
GPS Module USA original SIRF III/LP ultra-low power consumption GPS chip
Position accuracy 10 meters, 2D RMS
Tracking sensitivity - 159dBm
Acquisition sensitivity - 144dBm
acquisition Hot start 2s, warm start 32s,cold start 38s
Indicator LED 3colors indicator: power, GPS,GSM

 

Hardware Features
Positioning Location tracking via SMS/GPRS (TCP/UDP):
  1. SMS location racking.
  2. signal real time location tracking.
  3. GPRS location tracking via time interval.
Wiretapping set authorized phone number and with external MIC:
  1. Use authorized phone number to call the tracker, after 5rings, the caller can listen to vehicle inside voice.
  2. Unauthorized number calling, tracker will not be monitored.
Alarm
  1. main power cut off alarm.
  2. shock alarm.
  3. SOS.
Remotely control fuel/power
  1. remotely disable and enable fuel and power.
Product feature
  1. Small, slim, easy to install.
  2. Built-in switching power, wide voltage input range.
  3. Can be powered by cigarette lighter or vehicle battery power.

 

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up GT06N

Country
Carrier
APN
User
Password

The Sinotrack trackers work in bTYLNX with the ID found in the zbsH5 command, to configure the tracker send the following commands via text messages

  1. Restore factory settings
    RESET
  2. Set the time zone to UTC-0
    8960000E00
  3. Set the APN of the operator
    8030000 {{apn}} {{apnu}} {{apnp}}
  4. Set up the GPRS server
    8040000 54.85.159.138 8888
  5. Set update interval on
    8050000 60
  6. Set update interval off
    8090000 60
  7. Switch to GPRS mode
    7100000

To check the settings zbsH5