SinoTrack - ST-906

Visit the manufacturer website

Specification

Operating temperature	-20°C ~ 70°C
Storage temperature	-20°C ~ 70°C
Operating humidity	20% ~ 80%
Storage humidity	20% ~ 90%
Input voltage	DC9 ~ 80V
Working current	Around 60mA(12vDC), around 35mA(24vDC)
GSM Module	Four-Band GSM850/900/1800/1900(MHz)
GPRS connectivity	GPRS multi-slot class 10, GPRS mobile station class B
GPS Module	Ubox 7020
Position accuracy	10 meters, 2D RMS
Tracking sensitivity	- 159dBm
Acquisition sensitivity	- 144dBm
acquisition	Hot start 1s, warm start 30s,cold start 32s
Indicator LED	3colors indicator: Power, GPS, GSM

Hardware Features

Positioning	Location tracking via SMS/GPRS (TCP/UDP): SMS location racking. signal real time location tracking. GPRS location tracking via time interval.
Wiretapping	set authorized phone number and with external MIC: Use authorized phone number to call the tracker, after 5rings, the caller can listen to vehicle inside voice. Unauthorized number calling, tracker will not be monitored.
Alarm	main power cut off alarm. shock alarm. SOS.
Remotely control fuel/power	remotely disable and enable fuel and power.
Product feature	Small, slim, easy to install. Built-in switching power, wide voltage input range. Can be powered by cigarette lighter or vehicle battery power.

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up ST-906

Country

Carrier

APN

User

Password

The Sinotrack trackers work in 5epZZn with the ID found in the 8JlEY command, to configure the tracker send the following commands via text messages

Restore factory settings
RESET
Set the time zone to UTC-0
8960000E00
Set the APN of the operator
8030000 {{apn}} {{apnu}} {{apnp}}
Set up the GPRS server
8040000 54.85.159.138 8888
Set update interval on
8050000 60
Set update interval off
8090000 60
Switch to GPRS mode
7100000

To check the settings 8JlEY

Trackers