The TTU-2840XTreme’s rechargeable battery pack makes it an ideal solution for managing assets that are normally tethered to 12 or 24 volt systems but may sit disconnected for periods of time.
The TTU-2840XTreme high value tracking unit from CalAmp features a small size, superior GPS performance, an internal 5.3 Ah battery and three Inputs/ three Outputs (I/O). The TTU-2840XTreme is a complete vehicle tracking and communications device incorporating next-generation, super-sensitive GPS technology on LTE, GPRS, CDMA 1xRTT and HSPA cellular networks for installation in or on any 12 or 24 volt mobile vehicle. Superior internal antennas for both cellular and GPS eliminate the need for wired antennas and make the TTU-2840XTreme mountable virtually anywhere on the vehicle for easy, inexpensive installations. Messages are transported across the cellular network using enhanced SMS or UDP messaging providing a reliable communications link between the device and your application servers. The TTU-2840XTreme is designed for optimal size and power consumption coupled with superior performance and reliability resulting in dramatically reduced cost of ownership.
The TTU-2840XTreme employs CalAmp’s industry leading on-board alert engine, PEG™ (Programmable Event Generator). This advanced engine monitors external conditions and supports customer-defined expectation-based rules to help meet the needs of your application. PEG continuously monitors the vehicle environment and responds instantaneously to pre-defined threshold conditions related to time, date, motion, location, geo-zone, input,and other event combinations. With PEG, your unique application will meet demanding customer requirements. This behavior can be programmed by CalAmp before shipment at a customer’s facility, or over-the-air once the unit has been fielded.
The TTU-2840XTreme also leverages CalAmp’s industry leading over-the-air device management and maintenance system, PULS™ (Programming, Updates, and Logistics System). Configuration parameters, PEG rules, and firmware can all be updated over the air. PULS offers out-of-the-box hands free configuration and automatic post-installation upgrades. You can also monitor unit health status across your customers’ fleets to quickly identify issues before they become expensive problems.
To set NQNodo you need to configure as follows. With the following commands through several text messages, the ID is the MID 10 digits replied by vaa command
- Set up our operator APN
- Set the username and password of APN operator
- Establish the server where we will connect
- Reset device
To check the settings LuT