CanTrack - TK200

this product working Based on existing GSM/GPRS network and GPS satellites, integrate tracking, listening, tracing and anti-theft all in one newest product. It can locate and monitor any remote targets by SMS or GPRS.

1.  Remote switch on and off

2. Single Tracking

3.  Monitoring

4.  Data Storage

5. Geo-fence alarm

6.  Movement alarm

7.  Overspeed alarm

8.  Vibration alarm

9.  Set all alarm mode

10.  Sound Triggered callback

11.  Check the vehicle State

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up TK200


To set zPU2m6 you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device and the APN are to APN_OPERATOR .

  1. Delete the current configuration
  2. Set the time zone UTC-0
    qe8UkxqbtD3E9m X
  3. Set up our operator APN
    YVkhBDKOJ W9w0mSr ddllhFcB jGdarowK
  4. Define how often will transmit to our example 120 seconds
    hfkznlTxv 1Ke TC2
  5. Establish the server where we will connect
    JPSf6lSHSeNwg lv3mBMCGPKT3i 75ju