This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.
G200 Magnet GPS Tracker
- Size: 76.1*50*30.2 mm
- Non- installation with Voice Listen
- 6000mah rechargeable battery
- Standby time: 7-30 days depends on activities
- Anti-tamper Alarm if remove GPS from Metal
- GPS/LBS multi-tracking
- Power-Saving/Real time/Deeply sleep mode
- Powerful & Strong magnet design
- Real-time tracking by SMS/Platform
- Speeding/Geo-fence alarm
- Vibration alarm
- Support memory storage when GSM lost
Parameters
| Network | GSM/GPRS/GPS |
| Band | 850/900/1800/1900Mhz |
| GPS chip | Ublox7020 |
| GSM module | MT6261 |
| Accuracy | 5m |
| Non-installation | Powerful Magnet Design |
Set Up G200
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
Server d.plaspy.com IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.
