Loading...

Xexun - XT008

Function of gps traker:

 Rreal time tracking.
 interval tracking
 real street address replying
 track when no GPS signal.
 GPS+LBS tracking
 tracks playback.
 geofence alert
 movement alert
 overspeed alert
 Low power alert
 FOTA(firmware by the air)
 Listen in two-way communication
 vibration alert
 SOS alert
 Alert when cutting off the GPS antenna
 Alert then cutting off the external power
 Alert when switching on the ignition illegally
 Dual SIM,shift to the workable GSM operator automatially when the other GSM operator is not working or an roaming area
SD card (optional)
RFID (optional)
Remote the engine. (optional)
 Fuel monitoring,temperature monitoring( optional)                                                                                                   
camera (optional).   

 

SpecificationS of gps tracker

1-Oil Tester-for option.To test the oil level of oil tank of vehicles. 
2-Report the battery strength 
3-Temperature sensor
This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up XT008

Country
Operator
APN
User
Password

To set a Xexun device on cBFpSx, you must configure it as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device.

  1. Begin with the configuration
    TG8KmUY1tPh
  2. Set up our operator APN
    FkK9C1ivD zf8fo3A
  3. Set the username and password of our APN.
    oERYD1MbrhQSl nDmaW1NE
    KyT7SdB1qQOpZN8 Mzq6sxLS
  4. Establish the server where we will connect
    2lE4k3sFjdZ6B 44Yt4UUPkNADX bAhS
  5. Set the device to send data
    58OjeGYAAnpnsv
  6. How often we want to establish the position is sent every 60 seconds
    F8AdyhHJ4WivEgV