Loading...

Xexun - TK-102

TK102,add SD card slot,more bigger battery ,ARM7 processor
There is a SD card slot in TK102-2. The GPRS data can be saved in SD.

Support:
Support non-server based location
SD card memory to record GPS standpoints
Authorize/delete 5 preset phone numbers
Real-time Polling
Auto-Track by SMS
Voice surveillance
Mode switch between "track" and "monitor"
Geo-fence alert
Movement alert
Overspeed alert
IMEI checking
SOS button
Low battery alert
Hidden number tracking
SMS center
GSM ID
Motion sensor
Mobile tracking
Tlimit function

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up TK-102

Country
Operator
APN
User
Password

To set a Xexun device on FiyZLU, you must configure it as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device.

  1. Begin with the configuration
    TYTYOmWB7vm
  2. Set up our operator APN
    ndTA6vckL dbwuiMX
  3. Set the username and password of our APN.
    8EOdaFBqCpeFI 2llD7dIo
    AohRl3BiMjDDPRq btVytzO4
  4. Establish the server where we will connect
    xvCSNlC2vFxZ2 N69BUNqgjSmNM 59MQ
  5. Set the device to send data
    VFQVl4cdTjG1MD
  6. How often we want to establish the position is sent every 60 seconds
    alcK3AXvMhjItvv