The GL505 is a powerful waterproof GPS tracker designed for fixed asset tracking applications. It is powered by two user replaceable CR123A lithium batteries. Configuration allows it to wake up on a preset schedule to check if it needs to shift from dormant to active status and/or send update of its current location, then returning to a dormant state. Optimally configured, it will operate autonomously for 1000 days. Its built-in 3-axis accelerometer allows the GL505 to detect asset movement and transmit an alert message. The integrated @Track interface protocol allows the GL505 to communicate with a customer mobile phone or a backend server via GPRS/SMS and transfer reports of GPS position, etc. System integrators can easily incorporate the GL505 into existing tracking systems based on this full featured protocol.
-
Waterproof, IPX7 compliant
-
Low power consumption, long standby time for more than 1000 days
-
Powered by two user replaceable lithium batteries (CR123A)
-
Internal u-blox chipset
-
Quad band GSM/GPRS 850/900/1800/1900 MHz
-
Embedded @Track protocol
-
Internal 3-axis accelerometer for motion detection
-
Internal GSM antenna
-
Internal GPS antenna
-
CE/FCC certified
Set Up GL505
To set the tracker send the following commands by SMS messages, the sample setup the device password is YV9tA75L, this password is the default
-
Restore factory settings
AT+GTRTO=YV9tA75L,4,,,,,,FFFF$ -
Set the time zone UTC-0
AT+GTTMA=YV9tA75L,+,0,0,0,,,,,,FFFF$ -
Set the operator APN
AT+GTBSI=YV9tA75L,{{apn}},{{apnu}},{{apnp}},,,,,FFFF$ -
Set the GPRS server
AT+GTSRI=YV9tA75L,4,,1,d.plaspy.com,8888,54.85.159.138,8888,,0,0,0,,,,FFFF$ -
Set the update interval 60 seconds.
AT+GTFRI=YV9tA75L,1,1,0,0,,,60,60,60,60,7F,40,0,,,FFFF$ -
Enable SOS button notification input 2
AT+GTSOS=YV9tA75L,2,2,,0,0,0,0,0,0,,,FFFF$