Loading...

QuecLink - GMT100

The GMT100 is a water resistant GPS tracker designed for applications requiring low current drain such as motorcycles and boats. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Its quad band GPRS/GSM subsystem supports 850/900/1800/1900 MHz allowing the GMT100's location to be monitored in real time or periodically tracked by a backend server and mobile devices. Its built-in 3-axis accelerometer allows motion detection and extends battery life through sophisticated power management algorithms. Further reduction in current drain is achieved by configuring alternative recharge schemes for the internal battery. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The @Track protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, low battery and scheduled GPS position.


Features: 
  • Wide operating voltage 8V to 32V DC
  • Internal u-blox chipset
  • Low power consumption, long standby time with internal battery
  • Quad band GSM/GPRS 850/900/1800/1900 MHz
  • Embedded full featured @Track protocol
  • Multiple I/O interfaces for monitoring and control
  • Internal 3-axis accelerometer for power conservation and motion detection
  • Power consumption can be fully configured
  • Three working power modes
  • Water resistant, IPX6 compliant
  • CE/FCC certified 

 

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up GMT100

Country
Operator
APN
User
Password

To set 9sNzam you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is $ model $ which is the initial data from the device and the APN are those of APN_OPERATOR.

  1. Begin with the configuration
    3a3krD311N0cVbfRiwrFEnXZLwu3
  2. Set the time zone UTC-0
    blYHgEIXsyvCRq4PFAVgOyN96uUPXAl6mp
  3. Set up our operator APN
    XAVdALRnAAFZhWtL1RQJpzh6OYu3KVFbBhJv009i5hxSWMvPPB5
  4. Establish the server where we will connect
    u7LQPIYa5q4zGWeBn8Kl6bj9S9H83aKT09TuCmGaRO2Z8IDhJpho6orSXL8PBahffl8HDu9A1
  5. Define how often will transmit position 60 seconds.
    uUriKAK6jyN3gXLRAW0n0Y0rX3XJ5eZqgwLU9uMKyTcmTm9NxzDXJ
  6. Activate notification by SOS button input 2
    iwOdhdYPlbYcp5oY9N7VBSrOHBPjBmenIZhowDlS