Loading...

QuecLink - GV300

The QuecLink GV300 is a compact GPS tracker that is perfect for a wide range of vehicle tracking applications. It is designed with multiple I/O interfaces, allowing you to monitor and control external devices. The built-in GPS receiver of the GV300 has superior sensitivity and fast time to first fix, ensuring accurate and reliable location tracking. With its quad band GPRS/GSM subsystem, the GV300 supports 850/900/1800/1900 MHz, allowing you to monitor its location in real-time or track it periodically using a backend server or mobile devices.

One of the standout features of the GV300 is its built-in 3-axis accelerometer, which enables motion detection and extends battery life through sophisticated power management algorithms. This makes it an ideal choice for applications that require driving behavior monitoring or power conservation. The system integration of the GV300 is also straightforward, as it comes with complete documentation for the full-featured @Track protocol. This protocol supports a wide variety of reports, including emergency alerts, geo-fence boundary crossings, driving behavior, low battery, and scheduled GPS positions.

With its wide operating voltage range of 8V to 32V DC, the GV300 can be easily installed in various types of vehicles. It also features an internal u-blox chipset for reliable and accurate GPS tracking. The low power consumption of the GV300 ensures long standby time, and it even comes with an internal battery for backup power. The device is CE/FCC/E-Mark certified, guaranteeing its quality and compliance with industry standards. With its multiple I/O interfaces, internal and external GPS antennas, and internal GSM antenna, the GV300 offers a comprehensive solution for all your vehicle tracking needs.

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up GV300

Country
Carrier
APN
User
Password

To set the tracker send the following commands by SMS messages, the sample setup the device password is evXGf, this password is the default

  1. Reset to factory settings
    AT+GTRTO=evXGf,4,,,,,,FFFF$
  2. Set the time zone UTC-0
    AT+GTTMA=evXGf,+,0,0,0,,,,,,FFFF$
  3. Set the operator APN
    AT+GTBSI=evXGf,{{apn}},{{apnu}},{{apnp}},,,,,FFFF$
  4. Set the GPRS server
    AT+GTSRI=evXGf,4,,1,d.plaspy.com,8888,54.85.159.138,8888,,0,0,0,,,,FFFF$
  5. Set update interval 60 seconds.
    AT+GTFRI=evXGf,1,1,0,0,,,60,60,,,0,0,300,FFFFFFFF,0,0,0,FFFF$
  6. Enable digital inputs
    AT+GTDIS=evXGf,0,1,,,1,1,0,,2,1,0,,3,0,,,,,,,FFFF$
  7. Enable SOS button input 2
    AT+GTSOS=evXGf,2,2,,0,0,0,0,0,0,,,FFFF$