Start Your FreeMonth
From $0.99 USD*
Pay as you go. No contract
2.Built-in GSM/GPRS module supports GSM900/1800MHz (850/1900 MHz), it can work throughout the world.
3.It supports SMS communications or GPRS TCP connection and receive position information through cell phone message or look into track on the internet.
4.It provides such functions as SOS, fuel cutoff/power failure(optional), warning by cutting off external power wire, geo-fence, overspeed warning, historical data upload, parking throttle upload and moving car tracking timing upload.
5.It provides voice call function.
6.It is equipped with highly reliable electric circuit and complies with electronic industry standards.
1. SMS(Mobile Phone) and GPRS TCP/UDP Communication(Tracking Platform)
2.Track on Demand and Time Interval
3.Show Location Information on Mobile Phone/Tracking Platform (Speed,Date,Time,Longitude&Latitude)
4.Two-way Communication/Listening-In Function (Earphone Required)
5.GSM Blind Area Memory
6.Built-in Motion Sensor for Power Saving
7. Emergency Alarm
8. Movement Alarm
9. Geo-Fence Function
10. Low Battery Alarm
11. Towing Alarm
12. Speeding Alarm
13. GPS Blind Area Alarm
14. ACC Detection Function
15. Power-Cut Alarm
16. Engine Stop Function
17. Mileage Statistics
18. Power/Fuel Cut Off (Relay Required)
19. Open and Close the Door
To set SigsOo you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 0000 which is the initial data from the device and the APN are to APN_OPERATOR
- Factory reset
- Set up our operator APN
- Establish the server where we will connect
- Define how often will transmit to our example 120 seconds
- Enable GPRS mode
- Enable GPS mode