Loading...

V-SUN - TLT-8A

TLT-8AGPS/GSM is a car positioning and tracking device based on GPS technology and GSM/GPRS technology. It receives the latitude and longitude of the user’s location through cell phone messages and then locates the tracker on Google Map or other digital map software; or positioning data is uploaded by the tracker to the specified server through GPRS, and the user may search the real-time position and historical track of the tracker on the internet.
TLT-8AGPS/GSM car tracker applies to motorcycles, electric golf carts and private cars. The product with built-in antennae integrated is easy to install. With practicability of the devices and fineness, this device is also a perfect combination of elegant models and high performance.
Product characteristics
1. Built-in high-performance GPS chipset enables the product to provide accurate positioning in the event of weak signal and to work normally in urban area, valleys or other sight-limited districts.
2. Built-in GSM/GPRS model supports GSM900/1800MHz (850/1900 MHz), thus it can work throughout the world.
3. It supports SMS communications or GPRS TCP connection, and receives position information through cell phone message or used to look into movement track on internet.
4. It provides such functions as SOS, fuel/electricity shut-off, warning by cutting off external power wire, geo-fence function, Overspeed warning, historical data upload, parking throttle upload and moving vehicle tracking timing upload.
5. It has power-saving function and its waiting call time is improved in electricity-saving mode.
This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up TLT-8A

Country
Operator
APN
User
Password

To set ZBPzrQ you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 0000 which is the initial data from the device and the APN are to APN_OPERATOR

  1. Factory reset
    fa46GFzdcElDq
  2. Set up our operator APN
    z3ogYW6dsEg5S9djk6aWGn0yuxysveZBDQlbC
  3. Establish the server where we will connect
    bZwwRgYBoix6cPndDSLD0wkiNrOoe1
  4. Define how often will transmit to our example 120 seconds
    CXBgJhokzHbxFPBwT
    OwiA7aYMpzOijStgx
  5. Enable GPRS mode
    UhbY926
  6. Enable GPS mode
    1E6nUds