Loading...

V-SUN - V-690

Application  

1. Positioning, monitoring, safety protection and SOS fuction for children/pupils/middle school students, aged persons/disabled persons etc  
2. Management, safety protection and SOS fuction for explorers/business persons/field staff ect.  

Functions:  

1. 4 speed dial alarm buttons and one SOS button;  
2. SOS signal can be sent to the control center if the SOS button is pressed, so as to indicate the user's location precisely;  
3. The guardian can search the user's location directly through message without the need for monitoring system;  
4. Support active and passive monitoring;  
5. Support time setting and continuous/discontinuous tracking functions;  
6. Support the electronic fence function, and give alarm if exceeding the designated range (System support is required);  
7. The monitoring center can search the user's location through message/GPRS (System support is required);  
8. Track recording function, historical track playback function (System support is required).

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up V-690

Country
Operator
APN
User
Password

To set vwfYz8 you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 0000 which is the initial data from the device and the APN are to APN_OPERATOR

  1. Factory reset
    YVurBzcgPlizQ
  2. Set up our operator APN
    4SCeaOcYf31ULUg2pMkwd0x2O4ietLMovjwvJ
  3. Establish the server where we will connect
    KoP8yXziPB3fagXxU4EfJPfq8pTrMj
  4. Define how often will transmit to our example 120 seconds
    mhutfiUxoc7U93p8S
    oy1bpsQ94IjAJDIVq
  5. Enable GPRS mode
    mA9Wo3V
  6. Enable GPS mode
    H7zetkZ