Functions
* Call (default), two-way call
* Auto-answer
* Low cell alarm
* Mode shifting
* SOS Emergency Alarm
* Server shifting
* Automatic time calibration
* Remote monitoring
Hardware
* Charging voltage:110-220V
* Working temperature -20°-—65°
* Humidity: 5%-95%
* Limited working temperature:-30°C -- -40°C, +80°C-- +85°C
* Storing temperature:-45°C -- +90°C
* Start-up time, hot start: <1.5s Warm start: <34s Cold start: <35s(Autonomous)
* Accurate positioning: 3.0 m 2D-RMS , DGPS: 2.5 m
* Speed Positioning: 0.1m/s, DGPS:0.05m/s
* Power consumption: standby 48mA(Depending on the system network state and the user’ s operation method)
* Charging port: DC 5V 3A
* Call (default), two-way call
* Auto-answer
* Low cell alarm
* Mode shifting
* SOS Emergency Alarm
* Server shifting
* Automatic time calibration
* Remote monitoring
Hardware
* Charging voltage:110-220V
* Working temperature -20°-—65°
* Humidity: 5%-95%
* Limited working temperature:-30°C -- -40°C, +80°C-- +85°C
* Storing temperature:-45°C -- +90°C
* Start-up time, hot start: <1.5s Warm start: <34s Cold start: <35s(Autonomous)
* Accurate positioning: 3.0 m 2D-RMS , DGPS: 2.5 m
* Speed Positioning: 0.1m/s, DGPS:0.05m/s
* Power consumption: standby 48mA(Depending on the system network state and the user’ s operation method)
* Charging port: DC 5V 3A
This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.
Set Up V-680
Country
Carrier
APN
User
Password
To set the tracker send the following commands by SMS messages, the sample setup the device password is W1rB, this password is the default
-
Factory reset
*RESET#W1rB## -
Set the operator APN
#803#W1rB#{{apn}}#{{apnu}}#{{apnp}}##
-
Set the GPRS server
#804#W1rB#54.85.159.138#8888## -
Set the update interval moving 60 seconds
#805#W1rB#120#1## -
Set the update interval static 60 seconds
#809#W1rB#120#1## -
Enable GPRS mode
71W1rB0 -
Enable GPS mode
222W1rB