Start Your FreeMonth
From $0.99 USD*
Pay as you go. No contract
GT30i has inbuilt GPS module to obtain accurate position data and utilizes its GSM capability to send the position data to a specified mobile phone or server base. This allows users to monitor people or pets using the tracker.
GT30i supports two way voice communications. This communication can be activated either by the guardian calling the tracker or the tracker holder activating the SOS button. The tracker can be configured to report its location at preset intervals to the server base or mobile phone.
With internal memory, GT30i can store GPS coordinates when there is no GPRS connection. GPS coordinates can also be stored at specified intervals when requested by the user. GT30i
has the following functions and features:
SMS and GPRS TCP/UDP Communication (Meiligao Protocol)
AGPS (with GSM Base Station ID)
Track on Demand
Show Location Directly on Mobile Phone
Track by Time Interval
Track by Distance
Listen-in (Voice Monitoring)
GSM Blind Area Memory
Internal Memory for Logging
Inbuilt Motion Sensor for Power Saving
SOS Panic Button
Low Battery Alarm
GPS Blind Area Alarm (in/out)
Three Buttons for Making Phone Call and/or Sending Message
Built-in Super Magnet (optional)
To set a Meitrack device on pntGWI are configured through text messages, it is necessary to confirm these commands with user manual, then you need to configure as follows.
With the following commands through several text messages: In the example it is assumed that the device password is 0000 which is the initial of the device and data APN from your operator.
The most common commands for these enabled devices are placed (You should consult your manual).
- Delete settings
- Set the server where we will pass the APN and its operator, Replace the values of our operator
- Establish the tracker time zone UTC-0
- How often we want to establish the position is sent every 1 minute
- Establish that automatically transmits each event