Loading...

Meitrack - MT-80i

Applications
 Personal Tracking and Protection
 Pet Tracking
 Assets Tracking and Security
 Vehicle Tracking
Product Function and Specifications
 SiRF III GPS and Quad Band GSM 850/900/1800/1900Mhz
 Small Size (61x42x15mm) and Lightweight 50g
 Low Power Consumption and Long Standby Time
 Belt Clip for watch belt or pet collar
 AGPS ( with GSM Base Station ID)
 Track by SMS/GPRS (MEITRACK Protocol)
 Track on Demand
 Track by Time Interval
 Track by Distance Interval
 Track on Mobile Phone
 Listen-in (Voice Monitoring)
 Internal 4Mb Memory for Logging
 Inbuilt Motion Sensor
 Inbuilt Battery
 SOS Alarm
This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up MT-80i

Country
Operator
APN
User
Password

To set a Meitrack device on PmQN1O are configured through text messages, it is necessary to confirm these commands with user manual, then you need to configure as follows.

With the following commands through several text messages: In the example it is assumed that the device password is 0000 which is the initial of the device and data APN from your operator.

The most common commands for these enabled devices are placed (You should consult your manual).

  1. Delete settings
    4saIgmZ1
  2. Set the server where we will pass the APN and its operator, Replace the values of our operator
    D3FqWuEW3NwE0wqBk6psJhs35TqbWRmaeO6TsXc53l1xNy0n3CLdUkg
  3. Establish the tracker time zone UTC-0
    lzWSNetzip
  4. How often we want to establish the position is sent every 1 minute
    fLMvDEn9lkWk
  5. Establish that automatically transmits each event
    4pGcChUGJG