The T1 GPS vehicle tracker is quite a unique model simply because it can be used for both fleet and personal vehicle tracking. The T1 GPS tracker packs a lot of features which include, real time tracking, GPS logging, two way audio, listen-in, an S.O.S. button and not to mention the stop engine command.
Add accessories like a handset phone and be able to make & receive calls, or add an RFID reader to make sure only authorized person have access to the vehicle.
The T1 is clearly on a league of its own and it is one of the most popular models in the Meitrack line of trackers. The quality and craftsmanship of the T1 really defines the amount of time that Meitrack puts into research and development of all of its units combined with end user specifications.
Functions:
|
|
Set Up T1
To set a Meitrack device on mpDCRk are configured through text messages, it is necessary to confirm these commands with user manual, then you need to configure as follows.
With the following commands through several text messages: In the example it is assumed that the device password is 0000 which is the initial of the device and data APN from your operator.
The most common commands for these enabled devices are placed (You should consult your manual).
- Delete settings
5gtoThsR - Set the server where we will pass the APN and its operator, Replace the values of our operator
1MYEi1vUT2WhyUN99U42cfT1wnyRnDcf3SGizzmUGXTcIPeRP2fbe7w - Establish the tracker time zone UTC-0
fOpKJrkwFM - How often we want to establish the position is sent every 1 minute
W3gR4DerQa0o - Establish that automatically transmits each event
0thIgBuiBB