Loading...

Coban - GPS104

Detailed description:
It is based on GSM/GPRS(850/900/1800/1900MHZ)wireless telecommunication internet and GPS satillite global position system,track by several ways.provide monitor software and global map.real-time track through the monitor software in your pc;track through your PDA cell phone and googleearth.

 

Function:

  • Add and Delete Authorization
  • Single Locating
  • Auto track continuously
  • Track with limited times upon time interval
  • Track with unlimited times upon time interval
  • Smart track upon time and distance interval
  • Automatic update positions of vehicle turns
  • GPS drift suppression
  • Get location in absolute street address
  • Location Based Service (LBS)
  • Check the Vehicle State
  • Terminal (local) Time Setting
  • Monitor (Voice Surveillance)
  • Data logging
  • Data Load
  • Forward the third parties’ message
  • Charges Inquiry
  • Cut off the Oil and Power System
  • Execute immediately Mode
  • Execute depends on speed(Default mode)
  • Resume the Oil and Power System
  • Tracker’s Hardware Resetting
  • Sleep Mode
  • Sleep by time
  • Sleep by shock sensor
  • Deep Sleep by Shock Sensor
  • Start Work on specific time
  • No sleep mode
  • Geo-fence
  • Multi-area management
  • Movement alarm
  • Over Speed Alarm
  • Accident alarm (Option)
  • Shock Sensor Alarm
  • SOS
  • Low battery alarm
  • Power off alarm
  • GPS blind Spot alert
  • TCP/UDP switch
  • Configure parameters by USB
  • GPRS Setting
  • Modes Switch between “SMS” and “GPRS”
  • Less GPRS traffic
  • GPRS tracking & monitoring platform
  • Set up monitor center number
This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up GPS104

Country
Carrier
APN
User
Password

To set the tracker send the following commands by SMS messages, the sample setup the device password is MkxKAN, this password is the default

  1. Factory reset
    beginMkxKAN
  2. Set the time zone UTC-0
    time zoneMkxKAN 0
  3. Set the operator APN
    apnMkxKAN {{apn}}
  4. Set the username and password of APN operator
    upMkxKAN {{apnu}} {{apnp}}
  5. Set the GPRS Server
    adminipMkxKAN 54.85.159.138 8888
  6. Switch to GPRS mode to UDP or TCP
    UhUHf2AqBI,1,1
    or
    UhUHf2AqBI

To check settings checkMkxKAN

To enable the status of the fuel sensor or improve the transmission of the status of the digital sensors protocolMkxKAN 18