Loading...

QuecLink - GV500

The GV500 is a vehicle tracking device that plugs into a vehicle's OBDII port. Its compact design allows easy installation. Its internal OBD reader can obtain information from the vehicle's on-board computer and relay it over GPRS networks. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Its quad band GPRS/GSM subsystem supports 850/900/1800/1900 MHz allowing the GV500's location to be monitored in real time or periodically tracked by a backend server and mobile devices. Its built-in 3-axis accelerometer allows motion detection and extends backup battery life through sophisticated power management algorithms. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The @Track protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, low battery and scheduled GPS position.

Features: 
  • OBDII connectivity, easy to install
  • Quad band GSM/GPRS frequencies 850/900/1800/1900 MHz
  • Wide operating voltage range 8V to 32V DC
  • Internal u-blox chipset
  • Low power consumption, long standby time with internal battery

  • Embedded full featured @Track protocol
  • Internal 3-axis accelerometer for power conservation and motion detection

  • Internal GSM antenna
  • Internal GPS antenna
  • FCC/CE/E-Mark certified

 

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up GV500

Country
Carrier
APN
User
Password

To set the tracker send the following commands by SMS messages, the sample setup the device password is B3av3, this password is the default

  1. Restore factory settings
    AT+GTRTO=B3av3,4,,,,,,FFFF$
  2. Set the time zone UTC-0
    AT+GTTMA=B3av3,+,0,0,0,,,,,,FFFF$
  3. Set the operator APN
    AT+GTBSI=B3av3,{{apn}},{{apnu}},{{apnp}},,,,,FFFF$
  4. Set the GPRS server
    AT+GTSRI=B3av3,4,,1,d.plaspy.com,8888,54.85.159.138,8888,,0,0,0,,,,FFFF$
  5. Set the update interval 60 seconds.
    AT+GTFRI=B3av3,1,1,0,0,,,60,60,60,60,7F,40,0,,,FFFF$
  6. Enable SOS button notification input 2
    AT+GTSOS=B3av3,2,2,,0,0,0,0,0,0,,,FFFF$