Loading...

TZone - TZ-AVL19

Description:
·Support single location and continual tracking         

·Over-speed alarm, Low power alarm, Geo-fence alarm        

·Tremble alarm, Parking alarm, SOS alarm        

·Control car doors close/open, detect the status of engine on/off        

·Cut off the  engine power gradually and safely when in urgency        

·GPRS(TCP/UDP), SMS Support        

·When without tremble the device will go into sleep mode. 

Specifications:  

Special Features:        

1.SD card record (optional)         

2.Can connect external  RFID Reader, Cameras, Printer (optional)        

3.3D accelerometer        

4.Support sending GPRS data to IP or DNS        

5.Mileage calculation         

6.32Mb flash memory         

7.Fuel/oil level detection         

8.Temperature sensors  (optional)         

9.Two- way conversation          

10.Mobile Google map

11.Support ibutton        

 

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up TZ-AVL19

Country
Operator
APN
User
Password

To set Plaspy you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR

  1. Set up our operator APN
    GzqOsioeO3RRNKQhftkrtNwVIq0lqxZzgzQX2z
  2. Define how often will transmit to our example 120 seconds
    pGbpz8kyaIe3yjdlA2XU
  3. Establish the server where we will connect
    nIC4OMgsiWs1N5Nf62CVGBrCyaecvY43p
  4. Activate the GPRS mode
    htla9GxsE6KcyM