Loading...

TZone - TZ-BT04

Description:
TZ-BT04 is a Bluetooth Low Energy temperature and humidity data logger with the latest Bluetooth 4.0 technology and Nordic N51822 chipset. It can collect temperature and humidity of the surrounding environment and transfer to mobile devices such as smart phones via Bluetooth 4.0. Such data can be recorded as history data. BT04 can store up to 15.000 pieces of the temperature and humidity data. Mobile phone with Bluetooth 4.0 or above can download and istall App configuration tool. The temperature and humidity data can be uploaded to the server through GPRS network wirelessly. It can store and monitor temperature and humidity of the emvironment comprehensively. Its characteristics are small-sized, low-weighted, easily portable and highly accurate for wide use in the cold chain logistics, archives, labs, refrigerator, ect.

Project:

Features:

Signal transmission frequency

2.400 - 2.4835GHz

Protocol standard

Bluetooth 4.0

Modulation mode

GFSK

Send interval

5S,adjustable

Built in battery

600mAh /3V

Output power

-12dBm,adjustable

Communication rate

1Mbps

Receiving sensitivity

1Mbps@-93dbm

Maximum transmission distance

50 meters,adjustable

Service life

 1 year (depends on the mode of operation)

Net weight

25g

Outline size

50mm*50mm*20mm

Temperature detection range

-40℃~+125℃

Humidity detection range

0~100%RH

Temperature detection accuracy

±0.5℃

Humidity detection accuracy

±4%RH

 

 

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up TZ-BT04

Country
Operator
APN
User
Password

To set Plaspy you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR

  1. Set up our operator APN
    u9OIesskrL0DAtq3dIc2Mo6Ko6EQRNZGg2rCUu
  2. Define how often will transmit to our example 120 seconds
    tWmhDn6xqyblNprx9blA
  3. Establish the server where we will connect
    vzVIBAX7HmpEhsShbGCEehnbSewthHBoj
  4. Activate the GPRS mode
    PQNL30hOna9lBf