Loading...

TZone - TZ-TT01

Description:
The temperature transmitter can connect three digital thermometer via a single-wire interface. Digital thermometer do no need external power supply, and is powered directly by the temperature transmitter (temperature transmitter DC 5V external power supply). Temperature transmitter can quickly and accurately measure the temperature required to collect and eventually transmit data to the appropriate host by 2.4G RF wireless transmission technology.

Specifications:  

Feature:

Characteristics:

Dimension:

87mm*67mm*21mm.

N.W:

0.1kg.

Exterior Power charge:

DC 5v.

Inner lithium battery:

DC 3.7V.

Standby time:

2 months.

RF Frequency:

2.400-2.4835GHz.

TX Power:

18dbm.

Air data rates:

1Mbps@-85dBm.

Temperature precision:

0.5℃.

Detect Temperature range:

-55℃  ~  +125℃.

Air pressure:

860Kpa –1060Kpa.

Humidity:

Up to 75% non-codensing.

Operating Temperature Range:

-20℃ to +60℃.

LED indicator:

Three led.

1wire interface:

3 for digital thermometer.

 

 

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up TZ-TT01

Country
Operator
APN
User
Password

To set Plaspy you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR

  1. Set up our operator APN
    CUuzt7WkfM0a3opcdSWf1gg1ey48EsdkISPbIl
  2. Define how often will transmit to our example 120 seconds
    23w5JpQRfQxTX7Zdi5tn
  3. Establish the server where we will connect
    Zkkr0Qj9iGoqvDGjXfx3U4DYgxsPRkZOT
  4. Activate the GPRS mode
    PQehLKDhTr7raW