Loading...

TZone - TZ-RD05

Description:
TZ-RD05 is a multiple functions 2.4G RFID Reader designed by TZone Digital. It is widely used to manage multiple 2.4G RFID Tag including TZ-Tag01/TZ-Tag02, TZ-Tag03, TZ-Tag04 and TZ-Tag201. After configuration, it can manage one of these Tags above, but can't manage all of vary Tags using one firmware. Using RS485/USB and LAN port to connect upper management system, it will be very easy to manage things.

Specifications:  

Working frequency:

2.400-2.4835GHz.

Receiving sensitivity:

1Mbps@-85dBm.

Tag identification angle:

Omnidirectional.

Communication interface:

RS485/LAN.

Output port:

OUT .

Firmware upgrade:

Serial port upgrade.

Protocol standard:

Bluetooth 4.0 .

Supply voltage:

DC12V-24V.

Net weight:

0.15kg.

Working environment temperature

-40°C~+60°C.

Working environment humidity:

5% ~ 95% (non-condensing).

IP protection level:

IP55.

Dimensions:

Cylindrical,Diameter 170mm,Height40mm.

Reading distance:

50m.

Installation method.

Ceiling mounted.

 

 

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up TZ-RD05

Country
Operator
APN
User
Password

To set Plaspy you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR

  1. Set up our operator APN
    hEy2qrvGcskPCZvYjImHQFcU9L3vhwJkvE2ZSW
  2. Define how often will transmit to our example 120 seconds
    NlyeH1T2KvWKxOIZh1ax
  3. Establish the server where we will connect
    gymIOJbyZhltiALNNble2fxAjpj9e7gVG
  4. Activate the GPRS mode
    ydBAmjijbTbAPn