TZone - TZ-TT18

Visit the manufacturer website

The single use temperature and humidity transmitter TT18 built-in temperature/humidity transmitter and GSM module, need to inset SIM card use. TT18 can wake up only when it is time to send data, or when the user operates it. Other than this, it is in sleep state. So it can be used for a longer time to bring you more convenience.

Temperature and humidity transmitter TT18 can collect high-precision temperature/humidity quickly, and then transmit it to the server software through GPRS. It is widely uesd in the cold chain logistics, medicine storage, refrigeratory and so on.

Specifications:

Specification	Details
Dimension	80mm64mm25mm
Battery	Built-in 3.7V/2000mAh Lithium battery
GSM antenna	Built-in
Flash Memory	Can be save 2880 GPRS data
Temperature precision	±0.3℃
Detect Temperature range	-40℃ ~ +125℃
Humidity precision	±3%
Detect humidity range	0~100%
Operating Temperature Range	-20℃~ +60℃
Power Consumption	Active mode(avg.) < 100mA Sleep mode(avg.) < 2mA
Power Consumption	Active mode(avg.) < 100mA Sleep mode(avg.) < 2mA
Humidity	Up to 75% non-condensing
GSM chip	SIMCOM GSM chip, 4 Frequency GSM 850/ 900/1800/ 1900mHz
Indicators	Two LED indicators for Temperature , and GSM

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up TZ-TT18

Country

Carrier

APN

User

Password

To set the tracker send the following commands by SMS messages

Set the operator APN
*000000,011,{{apn}},{{apnu}},{{apnp}}#
Set the update interval 60 seconds
*000000,018,60,999#
Set the GPRS server
*000000,015,0,54.85.159.138,8888#
Activate the GPRS mode
*000000,016,1#

Trackers