Loading...

TZone - AVL-08

Applications:      
·Vehicle Security/Recover/Anti-hijacking         
·Mobile Asset Tracking, Location-based Services        
·Fleet Management: car, taxi, bus, truck etc.        
·Manage your Assets,Use for School bus, logistics project      

 Description:      
·Support single location and continual tracking         
·Over-speed alarm, Low power alarm, Geo-fence alarm        
·Tremble alarm, Parking alarm, SOS alarm        
·Control car doors close/open, detect the status of engine on/off        
·Cut off the  engine power gradually and safely when in urgency        
·GPRS(TCP/UDP), SMS Support        
·When without tremble the device will go into sleep mode        

Special Features:        
1.SD card record (optional)         
2.Can connect external  RFID Reader, Cameras, Printer (optional)        
3.3D accelerometer        
4.Support sending GPRS data to IP or DNS        
5.Mileage calculation         
6.32Mb flash memory         
7.Fuel/oil level detection         
8.Temperature sensors  (optional)         
9.Two- way conversation          
10.Mobile Google map
11.Support ibutton  

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up AVL-08

Country
Operator
APN
User
Password

To set Plaspy you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR

  1. Set up our operator APN
    0erkwvRXy74z7gTT46t816wo9IFeQCVN6ZYc2o
  2. Define how often will transmit to our example 120 seconds
    QSfo6cvndw31sKLyjvet
  3. Establish the server where we will connect
    oOT4eAAfWMmi2JZXn4sDloqxGwmq2iI1b
  4. Activate the GPRS mode
    yCAhgxsYTmyEvG