ThingSys - TS-H1

The ThingSys TS-H1 GPS tracker is a versatile and reliable device that offers a range of useful features. With its dial and answer phone call function, you can easily communicate with the guardian or wearer of the tracker. The GPS positioning feature allows the guardian to track the location of the device by sending messages to the watch, and the watch will respond with GPS position messages that include a Google Maps link. Additionally, the TS-H1 has a reminder function that can be used to set alarms.

This GPS tracker is equipped with an MTK operating system and supports GSM, GPRS, and GPS technologies. It also has optional support for BDS (BeiDou Navigation Satellite System) and APGS (Assisted GPS). The TS-H1 offers remote software upgrading, shakedown test and maintenance, and control capabilities. It has a tamper alert feature to notify the guardian in case of any tampering with the device. The tracker also supports LBS (Location-Based Service) for data saving in blind spots.

Other notable features of the ThingSys TS-H1 include a built-in battery, support for a single SIM card, accurate touchscreen, USB port, self-diagnostics for operating system and SIM card protection, and a waterproof rating of IP67. It has a GSM chip (MTK6261D) and supports GSM frequencies of 850/900/1800/1900MHz. The GPS chip used is MTK2503, and it has a BDS/GPS signal of BD2, 1561.098MHz/L1, 1575.42MHz C/A code. The tracker has a tracking time of 26 seconds and an LBS accuracy of 100-1000 meters. With its durable construction and reliable performance, the ThingSys TS-H1 is an excellent choice for various tracking applications.

Key Features:

  • Dial and answer phone calls
  • GPS positioning with Google Maps link
  • Reminder function with alarms
  • Supports GSM, GPRS, and GPS technologies
  • Optional support for BDS and APGS
  • Remote software upgrading and control
  • Tamper alert
  • LBS for data saving in blind spots
  • Built-in battery
  • Supports a single SIM card
  • Accurate touchscreen
  • USB port
  • Self-diagnostics for operating system and SIM card protection
  • Waterproof rating of IP67
This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up TS-H1


To set the tracker send the following commands by SMS messages, the sample setup the device password is 9xcBye, this password is the default

  1. Factory reset
  2. Set the operator APN
    apn9xcBye {{apn}}
  3. Set the APN username
    apnuser9xcBye {{apnu}}
  4. Set the APN password
    apnpasswd9xcBye {{apnp}}
  5. Set the GPRS server
    ip54.85.159.138 8888

To check settings CXZT