ThingSys - TS-V1

TS-V1 Professional Vehicle GPS Tracker 2G/3G/4G

  1. Main functions
    Positioning and Tracking: Through the on-line Positioning Platform or the cell phone to locates at times, and get the working status. You can choose the Positioning Platform by yourself.
  2. Triggering Emergency Alarm: When there is a emergency happened on the vehicle, you can put on the button and the installed device will send out alarm to the authorized numbers.
  3. Remote controlling oil and circuit: you can control the oil and circuit via the device by SMS in anywhere and anytime.
  4. Remote Monitoring: In anywhere and anytime, call the phone number in the device, when it connects, you can monitor the sound around 5 meter.
  5. Movement Alert: Send SMS to the device to start the movement alert function. When the vehicle is moving, the device will send the movement alert to all authorized numbers.
  6. Over-speed Alert: Send SMS to the device to start the movement alert function. When the vehicle is over-speed, the device will send the over-speed alert to all authorized numbers.
  7. Geo-fence: Set up a geo-fence for the device to restrict its movements within a district. The device will send the message to all authorized numbers when it breaches the district.
  8. Restart the device: send SMS to resume the default of device.
  9. Auto Track Track: You can set up auto track by SMS or on-line positioning platform.
  10. Mileage statistics; ACC checking; cutting off power and alarm.
  11. Compatible with the original anti-theft alarm: It will send SMS alarm after the original anti-theft alarm warning.
    ﹡Modify the IP and Port of Communication Protocol for different on-line positioning platform






95 * 75 * 25 (mm)




2G/ 3G/ 4G


Depending on specific country

GPS chip

SiRF III  or U-blox

GPS sensitivity


GPS accuracy

5 m

Time To First Fix

Reacquisition  0.1s

 Cold status  45s

Warm status  35s

 Hot status  1s

Work Voltage

DC  9V-36V


Chargeable changeable 3.7V / 600mAh Li-ion battery

Standby work current

< 30mA

Storage Temp.

-40°C to +85°C

Operation Temp.

-20°C to +70°C


5%--95% non-condensing


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up TS-V1


To set the tracker send the following commands by SMS messages, the sample setup the device password is H5juxs, this password is the default

Type the device IMEI
  1. Restore factory settings
  2. Set the operator APN
    apnH5juxs {{apn}}
  3. Set the APN username and password
    user {{apnu}} {{apnp}}
  4. Set the device ID, use the last 11 digits of IMEI, replace the 11 X by the identifier
    number{{('XXXXXXXXXXXXXX' + imei.substring(4,15)).slice(-11)}}
  5. Set the GPRS server
  6. Set the update interval 120 seconds
  7. switch to GPRS mode