Loading...

ThingSys - TS-V6H

TS-V6H Vehicle GPS Tracker

Parameters:

Content

Specs.

Dim.

94mm x 45mm x 14mm

Weight

85g

Network

GSM/GPRS

Band

850/900/1800/1900Mhz

GPS chip

UBLOX

GPS sensitivity

-159dBm

GPS accuracy

5m

Time To First Fix

Cold status  35-80s

Warm status  35s

 Hot status  1s

voltage input

9-75V  input

     

Battery

Build-in 3.7V 200mAh Li-ion battery

Storage Temp.

-40°C to +85°C

Operation Temp.

-20°C to +55°C

Humidity

5%--95% non-condensing

 

Features:

  • Car GPS Tracker built-in switching power supply, exceed wide voltage input range: 9-75 VDC;
  • Car GPS Tracker GPS continuous GPS positioning, GPRS report regularly;
  • Car GPS Tracker Support SMS message to check the location info;
  • Built-in vibration sensor, realization vehicle anti-theft intelligently;
  • ACC the ignition signal detection,vehicle status prompted;
  • Available to external microphone, to realize the remote voice surveillance function (optional)
  • Available to SOS to call the police and security alarm or for emergency (optional)
  • Available to connect external microphone, to realize the remote voice surveillance function;
  • Built-in backup battery, realize the illegal cut the line alarm;

 

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up TS-V6H

Country
Carrier
APN
User
Password

To set the tracker send the following commands by SMS messages, the sample setup the device password is oQFiRV, this password is the default

  1. Factory reset
    FORMAT
  2. Set the operator APN
    apnoQFiRV {{apn}}
  3. Set the APN username
    apnuseroQFiRV {{apnu}}
  4. Set the APN password
    apnpasswdoQFiRV {{apnp}}
  5. Set the GPRS server
    ip54.85.159.138 8888

To check settings CXZT