TK428 OBD-II GPS tracker can also be used to do vehicle's telemetry via OBD connector,
it can read the vehicle's ECU's data (speed, rpm, odometer, speed, fuel consumption, harsh acceleration, harsh brake, DTC code, driver behavior data...etc) via CAN-BUS.
It has plug & play design, which is compatible with all the cars with OBD-II connector, and it supports all the CAN-BUS protocols as followings:
|
No. |
Protocol standard |
Vehicle type |
|
1 |
ISO 9141-2 |
(Asian, European, Chrysler) |
|
2 |
ISO 14230 (KWP) |
Cars |
|
3 |
ISO15765 (CAN) |
Cars |
|
4 |
SAE J1939 |
Most trucks |
|
5 |
ISO 27145 |
Truck brand: Scania, Man, Benz(Actros) |
Set Up TK428
TopTen trackers work in msbuxn with the tracker ID that corresponds to the last 14 digits of the IMEI found in the Rui command, to configure the tracker send the following commands via text messages
- Restore factory settings
111111CLR - Set up the APN and GPRS server
111111WWW:IPN:54.85.159.138;COM:8888;APN:{{apn}},{{apnu}},{{apnp}};RPT:60;SLP:60;RUN:2;
To check the settings 111111WWW: