Loading...

TopTen - GT08

Functions for GT08 2G/3G Vehicle GPS Tracker:

  1. Track on SMS, Web or APP;
  2. RFID for personnel identification, supports 2.4G active RFID reader & Mifare1 IC card reader;(optional)
  3. Support 2.4G keyless alarm functions, arm/disarm by SMS/web/calling/RFID tag;
  4. Check the car’s real physical address (such as city & street name.);
  5. Check the location by LBS directly even there is no any GPS signal;
  6. Smart Engine on/off & door open/close status detection;
  7. Voice monitoring & 2-way talking(optional);
  8. Engine on alarm, door open alarm, power failure alarm, vibration alarm, movement alarm, Geo-fence alarm, over-speed alarm, SOS alarm(optional);
  9. Track by time interval or by distance;
  10. Stop the car safely by SMS or Web;
  11. Upgrade the normal car alarm with GPS tracking function
  12. Snap photo and send out via MMS &Email when there is alarm happens, snap the photo via platform;
  13. Speed limiter, when the speed is over limitation,the relay will response to slow down the car automatically;
  14. Crash alarm, when there is crash & it can detect it automatically;(optional)
  15. Fatigue driving alarm, if continuous driving time is over the limitation, the alert will be triggered;
  16. Support analog input for fuel monitoring, fuel loss alarm;
  17. I/O: 4 digital inputs, 1 analog inputs & 1 digital outputs; 
  18. Voltage:10V-60VDC, suitable for motorcycle, car or most big trucks;
  19. Smart Power save design for protection of vehicle battery;                
  20. Trace optimization when vehicles turns a corner;
  21. 8M-bit offline data logger, it can store up to 9,090 waypoints.
  22. User-defined SMS contents in different languages;                           
  23. Industrial design with high performance ARM7 processor;

 

Specifications

  • Working voltage: +6.0 ~+45VDC
  • Power Consumption:
  • Working current: 50mA;
  • Peak current: 800mA;
  • Inside Backup battery: Rechargeable 3.7V 500mAh Li-ion battery
  • Size of the main unit: 99*52*17 (mm)
  • Weight of the main unit: 76g
  • Working temperature: -20 ~ 85℃
  • Humidity: 0 ~ 95%
  • GSM frequencies: Quad-band: 850MHz/900MHz/1800MHz/1900MHz
  • GPS chip: U-blox chipset
  • Receiving ways 20 channels
  • Working frequencies
  • 1575.42Mhz C/A(GPS)
  • Receiving sensibility -160dBm
  • Positioning accuracy ≤10m (wide-open area)
  • Speed accuracy ≤0.2M/S (wide-open area)
  • Positioning mode Auto 2D/3D
  • Hot start 1 sec., average
  • Warm start 2 sec., average
  • Cold start 40 sec., average

 

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up GT08

Country
Carrier
APN
User
Password

TopTen trackers work in Pe0gnK with the tracker ID that corresponds to the last 14 digits of the IMEI found in the zIQ command, to configure the tracker send the following commands via text messages

Type IMEI number Your identifier is RQWnLeETKCSwN3YVgo5xh
  1. Restore factory settings
    111111CLR
  2. Set up the APN and GPRS server
    111111WWW:IPN:54.85.159.138;COM:8888;APN:{{apn}},{{apnu}},{{apnp}};RPT:60;SLP:60;RUN:2;

To check the settings 111111WWW: