Concox - X3

The Concox X3 is a versatile GPS tracker designed specifically for vehicle tracking. With its accurate real-time location tracking, two-way communication capabilities, and comprehensive driving behavior reports, the X3 is an excellent choice for fleet management and security monitoring applications. One of the standout features of the X3 is its support for RS232 and TTL interfaces, allowing for seamless integration with a wide range of accessories. Whether you need to connect external equipment or utilize an extended microphone for audio monitoring, the X3 has you covered. The extended microphone cable makes it easy to place the microphone inside the cab for optimal audio capture. Another notable feature of the X3 is its remote cut-off capability, which allows you to immobilize a vehicle by cutting off its power source or fuel supply via an installed relay. This feature can be invaluable in situations where you need to prevent unauthorized use or recover a stolen vehicle. The X3 also offers a range of driver safety features, including an over-speed buzzer that alerts the driver to lower their speed, and driving behavior analysis that detects and alerts you to dangerous driving behaviors. Additionally, the optional door status detection feature provides valuable insight into the status of your fleet vehicles, alerting you if a door is unexpectedly opened. With its panic button, the X3 allows drivers to quickly and discreetly contact dispatch or emergency support in case of an emergency. And to ensure that you never experience a power failure, the X3 includes a low voltage alert that notifies you when the external power voltage is lower than the threshold. Overall, the Concox X3 is a feature-packed GPS tracker that offers accurate tracking, advanced communication capabilities, and a range of safety features. Whether you need to monitor your fleet vehicles or enhance the security of your assets, the X3 is a reliable and versatile solution.

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up X3


To set the tracker send the following commands by SMS messages

  1. Reset factory settings
  2. Set the time zone UTC-0
  3. Set the operator APN
  4. Set the GPRS server
  5. Set the update interval every 60 seconds
  6. Enable GPRS mode

To check parameter settings GPRSSET#