FM2200 is a terminal with GPS and GSM connectivity, which is able to determine the object’s coordinates and transfer them via the GSM network. This device is perfectly suitable for applications, which need location acquirement of remote objects. It is important to mention that FM2200 has additional inputs and outputs, which let you control and monitor other devices on remote objects. FM2200 also has a USB port for NMEA output and configuration.
Basic characteristics
GSM / GPRS features:
Teltonika TM1 dual band module (900/1800 MHz)
GPRS class 10
SMS (text, data)
GPS features:
50 channel receiver
NMEA, GGA, GGL, GSA, GSV, RMC, WGS-84 protocol compatible
-160 dBm sensitivity (earlier versions)
Skytraq (Venus634LPx chipset), -161 dBm sensitivity (newer versions)
Hardware features:
ARM7 TDMI processor
1 MB internal Flash memory
Built-in movement sensor
Interface features:
Power supply: 10 ÷ 30V
USB port
2 digital inputs
2 open collector outputs
3 status LEDs
Special features:
Any element event triggers (external sensor, input, speed, temperature, etc.)
Highly configurable data acquisition and sending
Multiple Geofence areas
Sleep mode 7
Real-time process monitoring
Authorized number list for remote access
Firmware update over GPRS or USB port
Configuration update over GPRS, SMS or USB port
TCP/IP or UDP/IP protocol support
15000 record storing
CE and E-mark certified
Set Up FM 2200
Use Plaspy with a tracker
-
Set the Operator APN
CountryCarrierAPN
User
Password
- Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
Server d.plaspy.com IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.