The VT360 is a professional vehicle GPS tracker designed for reliable, Plaspy compatible real-time tracking and fleet management. Built around a high-sensitivity SiRFstar III GNSS module and proven GSM/GPRS communications, the VT360 delivers accurate positioning, time- and distance-based reports, and immediate location sharing via SMS links to Google Maps. Its internal backup battery preserves telemetry during main power loss so you keep visibility when it matters most.
Designed for commercial fleets and private vehicle security, the VT360 supports a comprehensive alarm set and remote control features — SOS, geo-fence, blind-area alerts, overspeed warnings and remote engine cut (immobilizer function). With SMS/GPRS reporting and simple integration for platforms that accept standard telemetry, VT360 integrates cleanly with Plaspy to provide actionable location data, fuel and temperature sensor inputs, and event-driven alerts for anti-theft and operational monitoring.
Key Highlights
- Plaspy compatible via SMS and GPRS for real-time tracking and fleet management integration.
- High-sensitivity GPS (SiRFstar III) with ~10 m position accuracy (2D RMS) and 20-channel tracking.
- Comprehensive security alarms: SOS, geo-fence, GPS blind area, low battery and overspeed alerts.
- Engine cut (remote stop engine) and remote listening for stolen vehicle recovery and immobilization.
- Supports mileage, time- and distance-based reporting and SMS link to Google Maps for instant viewing.
- Analog input for temperature or fuel sensor monitoring to support telemetry and fuel monitoring workflows.
- Internal backup battery retains reporting during main power loss to maintain continuous tracking.
How It Works with Plaspy
VT360 sends positioning and status data to Plaspy using SMS or GPRS. Plaspy ingests those messages to provide real-time tracking maps, event alerts, and historical reports. Integration requires configuring the device to forward location strings and alarm messages to the Plaspy endpoint or phone number used by your Plaspy account.
- Real-time location and telemetry updates delivered via GPRS (or SMS where GPRS is unavailable).
- Event-driven alarms (SOS, geo-fence, blind-area, overspeed, low battery) appear as Plaspy alerts for rapid response.
- Mileage and time/distance reports transmitted over SMS/GPRS for fleet reporting and compliance logs.
- Remote immobilizer (engine cut) and output control executed through SMS/GPRS commands routed by Plaspy.
- Analog input supports fuel monitoring or temperature sensors; Plaspy can display telemetry trends when configured to accept sensor data.
Technical Overview
| Connectivity | GSM/GPRS (SMS and GPRS tracking supported) |
|---|---|
| Bands | GSM 900/1800/1900MHz (standard) or optional GSM 850/900/1800/1900MHz |
| Power & Battery | Input +9V to +40V; internal backup battery supported; SIM type 3V; peak current <1.0A, average <300mA |
| Interfaces | 2 digital inputs (one positive, one negative triggering), 2 outputs for remote control, 1 analog input for temperature or fuel sensor, 1 SOS button, power on/off button, relay and microphone included |
| GNSS | SiRFstar III chipset; sensitivity down to -104 dBm (E-GSM 900/850); ~10 m position accuracy (2D RMS); 20-channel all-in-view; L1 1575.42 MHz; WGS-84 datum |
| Bluetooth | No built-in Bluetooth specified (can be used alongside platform-level Bluetooth sensors if the tracking setup supports external sensor data) |
| Remote Management | Remote configuration and control via SMS/GPRS commands; SMS link with Google Maps for instant location viewing |
| Form Factor | Approx. 75 × 54 × 25 mm; weight 123 g; vehicle-mountable enclosure |
| Environmental | Operating temperature -20°C to +70°C; up to 75% non-condensing humidity |
| Accessories | Includes GPS antenna, GSM antenna, socket cables, relay, microphone, and user manual |
Use Cases
- Fleet anti-theft and immobilization — use SOS, geo-fence and remote engine cut to secure vehicles and recover stolen assets.
- Route, mileage and compliance reporting — time- and distance-based reports plus mileage via SMS/GPRS for operational invoices and logs.
- Driver behavior and overspeed monitoring — receive overspeed alerts and review historical tracks within Plaspy for coaching and safety programs.
- Fuel monitoring and remote diagnostics — analog input supports fuel or temperature sensors to feed telemetry and reduce fuel-related losses.
- Remote listening and incident investigation — built-in microphone and remote listening capability support situational awareness when required.
Why Choose This Tracker with Plaspy
When you need a straightforward, robust GPS tracker that integrates with Plaspy, the VT360 is a practical choice. It combines accurate SiRFstar III GNSS positioning with standard GSM/GPRS communications to deliver dependable real-time tracking, alarms, and telemetry without complex integration work. The device’s analog and digital inputs make it suitable for fleet managers who require fuel monitoring, ignition/engine-state detection, and remote control such as immobilizer/engine cut. Its internal backup battery and proven environmental tolerance help ensure continuous reporting in critical scenarios.
Choose the VT360 for reliable real-time tracking, anti-theft protection, and telemetry that plugs into Plaspy via SMS or GPRS. The result is a manageable, cost-effective solution for fleet management and vehicle monitoring that gives dispatchers and managers timely insights and remote control where it matters.
Set Up VT360
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
Server d.plaspy.com IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.